Discussion:
AppleWin Version 1.30.18.0 Released
(too old to reply)
Hugh Hood
2024-03-24 01:28:19 UTC
Permalink
Tom Charlesworth has released the latest version of his AppleWin emulator.

Since I believe Tom does not currently have access to the newsgroups,
I'll put this up.

From his github site:

1.30.18.0 - 23 Mar 2023
-----------------------------------------------------------------
[Change #1272] New HDC firmware v2 to support returning HDD size in Y:X
for status call. [@peteri]

[Change #1277] Add (debug) cmd line switch to revert to HDC firmware v1:
-hdc-firmware-v1.

[Change #1279] Support Saturn RAM card in slot 3 for any Apple II model
(for Robo Systems' RoboCAD 2). cmd line switch: -s3 Saturn

[Change #1159] Speaker: change from mono to stereo sound buffer.

[Change #1247] Robocom's Interface Module dongle: use actual values for
1000 & 1500 series dongles.

[Bug #1261] Fix for $C010 which should not read the keyboard latch on
Apple II and Apple II+.

[Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is on
stack and SP points to ABS16!

[Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity.


I'll add that running RoboCAD 2 (which requires a Saturn 128K card
emulation in a slot other than slot 0) works very well!


<https://github.com/AppleWin/AppleWin/releases>





Hugh Hood
MummyChunk
2024-10-16 19:31:27 UTC
Permalink
Post by Hugh Hood
Tom Charlesworth has released the latest version of his AppleWi
emulator
Post by Hugh Hood
Since I believe Tom does not currently have access to th
newsgroups,
Post by Hugh Hood
I'll put this up
From his github site
1.30.18.0 - 23 Mar 202
----------------------------------------------------------------
[Change #1272] New HDC firmware v2 to support returning HDD size i
Y:X
Post by Hugh Hood
[Change #1277] Add (debug) cmd line switch to revert to HD
-hdc-firmware-v1
[Change #1279] Support Saturn RAM card in slot 3 for any Apple I
model
Post by Hugh Hood
(for Robo Systems' RoboCAD 2). cmd line switch: -s3 Satur
[Change #1159] Speaker: change from mono to stereo sound buffer
[Change #1247] Robocom's Interface Module dongle: use actual value
for
Post by Hugh Hood
1000 & 1500 series dongles
[Bug #1261] Fix for $C010 which should not read the keyboard latc
on
Post by Hugh Hood
Apple II and Apple II+
[Bug #1257] 6502/65C02: Fix JSR for edge-case where JSR ABS16 is o
stack and SP points to ABS16
[Bug #1276] Phasor in Echo+ mode: fix the chip-select polarity
I'll add that running RoboCAD 2 (which requires a Saturn 128K card
emulation in a slot other than slot 0) works very well
https://github.com/AppleWin/AppleWin/releases
Hugh Hoo
Anyone have any experiences to share with thi
version


This is a response to the post seen at
http://www.jlaforums.com/viewtopic.php?p=662342851#66234285

Loading...